| Power Off Memory | Support |
| Idle Motion | Activate Preset/ Scan/ Tour/ Pattern if there is no command in the specified period |
| Protocol | SN-SD, Pelco-D |
| Video and Audio |
| Compression | H.265, H.264, MJPEG |
| Frame Rate | Main Stream: Thermal: D1 @25/30fps Visible: 1920×1080/1280×720 @25/30fps |
| Sub Stream: Thermal: CIF @25/30fps Visible: D1/VGA/640×360/CIF/QCIF/QVGA @25/30fps |
| Bit Rate Control | CBR/VBR |
| Bit Rate | Thermal: 100Kbps~6Mbps Visible: main stream: 500Kbps~12Mbps; sub stream: 100Kbps~6Kbps |
| Region of Interest | Off / On (8 Zone, Rectangle) |
| Electronic Image Stabilization(EIS) | N/A |
| Digital Zoom | 16x |
| Mirror | Support |
| Defog | Support |
| Motion Detection | Support |
| Privacy Masking | Off / On (4 Area, Rectangle) |
| DVE Image Enhance | Support |
| Audio Compression | G.711, AMR, RAW_PCM (Optional) |
| Intelligence |
| Intelligent Functions | Motion detection, Disk alarm, I/O alarm, Temperature alarm |
| IVS | Perimeter ,Single Virtual Fences ,Double Virtual Fences ,Object Left ,Object Removed |
| Temperature Detection |
| Temperature Detection | Point detection, Area detection |
| Temperature Alarm | Over temperature alarm, Temperature difference alarm |
| Precision | Max (±2℃, ±2%) |
| Detection Area | Support 8 areas (8 target) |
| Response Time | ≤30ms |
| Effective temperature working environment | -10 °C ~ 55 °C (14°F ~ 131 °F) |
| Theory of temperature measurement range | -30 °C ~ 200 °C (-22°F ~ 392 °F) |
| Temperature display mode | Temperature target >5℃, Display absolute temperature value; Temperature target ≤5℃, Display relative temperature value (temperature difference DEV = highest value – average) |
| NETWORK |
| Ethernet | RJ-45 (10/100Base-T) |
| Protocols: | IPv4/IPv6 ,HTTP,RTSP/RTP/RTCP, TCP/UDP, DHCP, DNS, PPPOE, SMTP, SIP ,802.1x |
| Interoperability | ONVIF, CGI |